Threaded-Body Hydraulic Single- Acting Cylinder

• To insure quality, this threade- body hydraulic single-acting cylinder employs imported oil sealsand arts. Oil leak during operation are extremely insignificant; will deliver long-term leak-free severice during high pressure clamping.
• This cylinder is very compact and is suitable for use in clamping devices where cylinders mnst be arranged within a confined space.
• This type of cylinder may be used in a push-up situation where it is pulled back by a spring. It cannot be used in a pull-back arrangement.
• During installation, the contact angle of the rod and workiece should not be greater than 10° .

TYPE : A

TYPE : B

Schematic diagram of base installatiom

Dimensional Table

		TC-12A	TC-16A	TC-20A	TC-25A	TC-12B	TC-16B	TC-20B	TC-25B
Bore Size mm		12	16	20	25	12	16	20	25
Stroke mm		10	12	15	16	10	12	15	16
Clamping Force	100kg/cm²	110	200	300	490	110	200	300	490
	500kg/cm²	570	1000	1570	2460	570	1000	1570	2460
Spring return strength Min kg		2.5	5	7	12	2.5	5	7	12
Min. Pressure 500kg/cm²		10	10	10	10	10	10	10	10
Required oil volume cc/10 mm strock		1.13	2.01	3.14	4.91	1.13	2.01	3.14	4.91
A		38	46.5	56	59.5	45	52.5	65.5	68.5
B		25	33	42	44.5	25	33	42	44.5
C		7	8	8	11	7	8	8	11
D		3	3.5	4	5	10	9.5	13.5	14
E		12	16	20	25	11	15	19	23
F		M22x1.5	M22x1.5	M22x1.5	M22x1.5	M22x1.5	M22x1.5	M22x1.5	M22x1.5
G		—	—	—	—	M6x1.0	M6x10	M8x1.25	M8x1.25
H		—	—	—	—	6	6	8	8
I		—	—	—	—	5.5	5.5	6	7
J (Min/Max )		16/24	20/32	24/41	28/44	16/24	20/32	24/41	28/44
K (Max)		8	9	9	11	8	9	9	11
L (Min)		31	24	40	52	31	34	40	52
M (Min/Max )		9/12	12/16	16/24	18/25	9/12	12/16	16/24	18/25
SW1		—	—	—	—	10	13	17	19
SW2		22	26	33	38	22	26	33	38
SW3		17	22	24	32	17	22	24	32